Double Din Car Stereo Car Speaker Wiring Guide For In-dash And In-door Speaker


Connect the positive wire to the + terminal on your new vw navi speaker. Connect the negative wire to the - terminal on the speaker. Mount the speaker in to the dash. Insert the screws in to the mounting holes tighten in order to fix the speaker in the dash. Mount the grille back in place press to set the friction fittings.Find the notch which is used to dismount the grille from the door panel. Position a flat head screwdriver in to the notch apply proper force to pry off the grille. Loosen the screws which are used for the purpose of securing the speaker to the door with a Phillips head screwdriver. Pull the speaker out of the door to expose the wires.

Have you ever thought about installing new speakers? You can find the speakers located either in your automobile or in the dash or on the side of the doors. No matter where your automobile speakers are you require to learn how to wire automobile speaker. Installing automobile speaker will require connection of the speaker wires to the new.Find out the screw or friction fitting for the fix of the speaker grille. Pry up on the grille with a flat head screwdriver when a friction fitting is in use. Unscrew the grille with a Phillips head screwdriver.Unscrew the existing speaker pull the speaker out of the dash. Then you can find the speaker wires. Disconnect the wires from the terminals on the speaker. Pay attention to colors of the wires on the + - terminals of the speaker.

Check to see if all of the speaker wire connections are attached. Screw the speaker to the door. Set the grille back on the door panel press until you listen to it snap in to place.Note: Remove your dashboard to access the speakers, when the speaker grilles can not be removed. Remove the door panel on older vehicles to access an in-door speaker.

Pull the wiring connector out to disconnect the wiring connector from the speaker. Attach a universal wiring harness to the terminals on the speaker. Plug the other finish of your universal wiring harness in to the original wiring harness. It is of great importance to make sure that the polarity of the each wiring harness is correct. If your vehicle does not feature a wiring harness, use a crimp tool to crimp the wires onto the speaker terminals.

As all of us know, Global Positioning Technique, often known as GPS, is defined as a satellite-based worldwide navigation technique that gives out reliable location time knowledge in all types of weather anytime, anywhere on Earth. Due to the systems reliable navigation feature, GPS systems have been widely used in cars for guiding drivers to the right location smoothly. A golf gps technique can also aid drivers to seek detours away from paths with heavy traffic. Plenty of automobile lovers have sought out the appropriate GPS device before they buy a automobile. You see the attraction of it.



Views: 13

About the Author

sanford tammy

Eonon.com is the best online shop to buy the highest quality golf gps and vw navi at the lowest price. Please rest assure to buy here.


Comments


No comments yet! Be the first:

Your Response